Cantilever Type Adjustable Roll Former infinite varieties of "C" channels and Z channels within the parameter of the machine, without tool change. The product dimension changeover time can be as low as 10 min.
It is very easy to change one dimension of the web height ("h") or the leg length (l) of C or Z channels.
Switch C To Z: Only rotate some stands.
Change sizes for C Or Z: Press button on the machine, motorized to change the position of one side of rollers.
Change degree for Top flange of C: Rotate some stands
De-coiling→Entry Guide→Leveling→Pre-Punching→Pre-Cutting Adjustable Rollformer→Straightening→→ Run Out Table
1. Hydraulic un-coiler
2. Entry Guide + Five(5)-Roll Leveler
3. Hydraulic Pre Punching Device
4. Hydraulic Pre Cutting Device
5. Cantilever Type Adjustable Roll Former (18 Roll Stations)
6. Strengthening Device
7. Run Out Table
8. Electric control system
9. Hydraulic station
(1) Max. Coil Width: 650mm
(2) Suitable Coil Thickness: 1.0-3.0mm
(3) Suitable Raw Material: Hot Rolled Steel, Cold Rolled Steel, Galvanized Steel
(4) Yield strength: 350Mpa
(5) Roll Station: 18 Forming Stations
(6) The material of the roller: GCr15(Equal To 100Cr6 Bearing steel) HRC58-60
(7) Line speed: Forming speed:10-15m/min